Recent content by theboss

Everything I found is an aluminum brick mounted right in front of the valve assembly above the right front wheel motor

Not entirely sure but I think since I powered the solenoid manually that would rule out everything to the valve block. But I only could power 1 solenoid at a time. I’m not sure how this system works because this is like a non existent 753 maybe both solenoids need power Who knows. In the...

So did some work on this. Manually powered the solenoids on top of the valve assembly and they both click. So I decide to start it and turn the auxiliary on and power a solenoid and no movement

From what I can find online the diverter valve would be an aluminum brick but they were optional and I believe only used if you have rear auxiliary which I do not but I have no idea. This hydraulic setup is all new to me. My last one used clutches and only had a pump for the rams my problem I...

So, I discovered my auxiliaries weren't working when I connected my plow for the first time. So, I lifted the cab and the wires coming out of the lever tube from the switches were just lying there no connectors or anything just strait cut wires. So, I can't figure out where the connection from...

So, looking thru that manual i am following the hydraulic flow and they all show a diverter valve which I don't see anywhere. By this chart the 2 solenoids I have on top should my auxiliary solenoids. This picture is actually upside down from what i have. #11 would be at 7 o'clock position.

Yes, I do have the BOSS.

Yes, I do have the BOSS system.

508611787 From what I can tell I believe it is a 1990. I can't find any diverter valve which is what all the schematics I find have.

Thank you kindly for taking the time to help me out. Where do the wires on the machine side land? I only have 2x 2-wire solenoids that I can see and are right on top

Sorry I didn’t hit reply

That would be cool. Do you have the right side joy stick that has a trigger and 1 switch you can move left and right?