Recent content by TDB2

I have one of these machines. PT 110 F. Has 1200 hours on it. I have not had this issue but I have had some others and in so doing I have unplugged every plug I could get to from the ECM to every sensor I thought it was connected to including the control screen in the cab, and inserted...

Maybe, but I am no expert. I am just am a problem solver elimination kind of dude. If you are gonna throw parts at it then start with the cheapest and go up. The dude who suggested all the plugs is a good place to start and free. I did this also with di-electric grease in every connection I...

Does it back up properly?

Good to know I guess. I never would have bought them if I thought it would work without them. Glad you got it going.

I have a couple or Terex machines. The PT110 had the undesired track movement intermittently. Drove me crazy. I bought it with this problem. Several other shops could not fix it. I was able to fix it myself (finally) by replacing BOTH sensors and BOTH sensor harnesses. I don't believe your ever...

Hello Ster1. I have one of these machines. I had the code for undesired track movement, but very intermittingly. Drove me crazy. I chased it down to the speed sensors in the drove motors. I was unsure which one so I replace both....and replaced both wiring harnesses from the drive motors back...

I suggest that you look into your valve body that controls the drive motors. I recently purchased a PT110F that had low pressure on the lift arm hydraulics. Figured that the pump was bad. Took the pump out and apart and it all looked very good. Put it all back together and no change. I used the...

And have you fixed your machine yet?

Hey thanks for the response. Chasing down issues like this can be very expensive and time consuming and sometimes a dead end. I was actually able to fix my machine. I replaced BOTH of the speed sensors in hydraulic drive motors AND BOTH of the speed sensor harnesses connecting them from the...

I have a PT110F with the same problem of undesired track movement. I have tried several things, like too many to list and have had no success. The only thing consistent is heat. It will work fine for a while, say 30 minutes and then it starts erroring out. I am at a loss I think without the...