Recent content by t-man

i have found the problem.i removed the case drain fitting from the left half of the pump and the worst!! a lot of brass shavings and a large piece of brass.so i will let you know what i find. does anyone have a hydro pump for an 863? thanks

i had the whole pump apart.everything went back together just great and just as the manual said.after i put it back in the machine it moved back and forth. then the trans. light flashed on and off a few times every thing seemed ok. then the trans. light came on and atayed on. that is where i am...

i repaired the hydro because the machine caught fire. i just rplaced the seals and o rings and the main pressure relief valve spring. the steering linkage is ok and it all moves. the oil is foamy when the machine is running in the tank.when i crack the line and move it the hose spits and hisses...

i have an 863. i just overhauled the hydostatic pump reinstaled it in the machine.everything worked at firts now it will not move. the right wheel will move very slow when the machine is up on jack stands.the left wheel does not move at all.one other thing i noticed is that without the machine...