Recent content by Simkiw

Hello, I have bobcat 313, looks to me like external electric clutches need to be replaced, one low apeed and one high speed. I took bolt off holding clutch to drive shaft and outside electric magnet came off. Can't get rest of clutch off, seems to be fixed onto drive shaft. Any help how to get...

Anyone have bobcat 313/310/371, would like to talk to you about it. I just replaced four clutches, like a new machine.

All four clutches replaced, turns on a dime. Next going to replace filters and fluids. Getting to know this machine is a learning curve, but not too bad. Would like to talk to someone who has 310/313/371.

Help, I can't figure out how to pop out clutch. Looks like a bolt runs through the gears from outside where the clutch adjuster is. I cannot figure out how to get this out. I keep turning the nut counter clockwise but just keeps turning. Help.

Parking brake not working on 313 bobcat. which position is on? Its on left side of machine when sitting in it. Guy I purchased from said it was always down. Is down off position for 313 bobcat parking brake?

Has anyone replaced clutch plate 313/310/371? They are similar machiches. I am attempting to change four clutch plates, belly of machine is open, two clutches on each side(forward reverse). I will release inner and outer chains and pull apart clutch. This machine has electric slow /high speed...

Will be posting pic soon. Low speed electric clutch works. Now going to replace clutch plates, service manual makes it look simple. Does anyone know how much time this should take. Are the key links for the chane easy to get off, do I need special tool?

l called babcat dealer, new electric clutch $140. Found alto clutch dealer "Spring City Brake" that will order clutch plates that are cheaper that rebonding. Anybody familiar with 313 or 310 bobcat, would like to hear some feedback on this machine.

I have pictures, just cant figure out how to post, checked everything under profile, just don't see link to upload pictures. I tried to take off the outer electric clutch, looks like its welded to the center shaft, thin metal beed between o ring of clutch and shaft from engine. How can I free...

I am going to try to repalce the Clutch plates, do you know where I can find used parts for this machine. Called the dealer for clutch plates. Need slow speed electric Clutch.

Just took off outside slow speed clutch, looks like magnet. This machine has a high speed that is working, inner electric clutch. Steering not good, reverse works better than forward. Do you think clutch need adjustment or new clutch?

I was told the low speed electric clutch does not work. Seen electric clutch on ebay $200, but not sure if wright one. Anyone know what clutch 313 uses? I have high speed which is engaged by a switch. Do I need a slow speed, what are advantages?

I have 313 bobcat, hard to turn, only high gear works. It has electric clutch activated by a switch. Anyone familiar with this machine? Could clutch be tightened to make it turn better? How much new clutch and ease of install?