Recent content by Shifted_04

Not sure why they have both on the Exc (terminal R) post. The red wire is definitely suppose to be on the terminal S post and the purple on the Exc terminal R post. The Exc terminal R post should only put out 1.3-2.5V so not sure why they would have both connected to that. Believe terminal S...

Unplugged the alternator and constant power to the control side of the keyed power relay went away. Every picture I've seen on Bobcat's Mando alternator has the red wire on the S terminal and the Purple wire in the Exc terminal.

Appreciate the quick response. Already did that. I believe the issue is in the control side of the Switched Power Relay. To my knowledge with power or ground on the control side of the that relay should be controlled by the keyed switch. Keyed switch has no effect on voltage across the control...

Serial #: 512217583 With key removed from machine, power to the BICS unit and hydraulic pressure warning light are constant. Thinking it might be the key switch I disconnected the wires on the back of it with no change. If I remove the keyed power relay then power goes out (not a relay issue -...