Recent content by ScottMc

I know this is an old post but I am hoping to glean some information from it as I have a 753 with only 1500hrs showing the same issue in reverse on the left side! I am convinced it is a sticking relief valve also. What is the best way to work out the pump model in order to find out if the check...

I've looked pretty well at the service manual and the machine and it would appear that there are no springs on any linkages. The pintail arms are connected via a pivot bush to the levers. The centering plate that covers the pineal levers has a cantering spring located at each side but I would...

Thanks for your input farmshop, I spent a fair amount of time under the cab adjusting the park brake yesterday. I had a look at the main linkages at the same time. There did not seem to be any significant wear or slop in the linkage or levers. The machine drives almost perfectly straight with an...

Hi all, I'm a new member and new to skidsteers. I bought an old 753 with a genuine 1600hrs on the original engine pumps etc. I'm sure that there has been similar posts previously but I am having trouble searching them out. I have good drive strength (spinning wheels when against an immovable...