Recent content by SBLGFD

11/28/12 update Bobcat called last night they believe its the computer that needs to be replaced. They had a used one on the shelf a installed it as a trial run and all seemed to work, so they are installing a new style and we should have the machine back in the near future. Thanks for all the...

11-23-12 update Hope everyone had a good Thanksgiving! Spent a fair amount of time yesterday trying to find an issue, unfortunately no luck. Checked the wires as best we could, dropped the head liner out , tilted the cab etc all with no luck. Pulled the solenoid and did the hose clamp trick...

OK will start down that road tomarrow, any known common failure points?

11/20/12 16:40 - update - pulled the RPM sensor - plastic cap was split but still on it - Oh joy we have found the problem - or not- reinstalled reset to 0.050 and no change in condition. Chris

11/20/12 Update So I called and got the following additional information Serial # 517611753 Kubota V2203 He started the machine - still no tach reading and only three green lights - but he was able to move it about 2 feet before it locked up and now back to the same issue - won't move. He was...

Thanks for the reply, I questioned them on how they installed it. They were aware of the .050 separation. They said that the new RPM sensor comes with a auto setting feature?? They were instructed to run the sensor down on the fly wheel and start the engine. Apparently there is some sort of...

Hello to all and thanks in advance! I have been reading and learning – but my first po st. First of all the machine is 200 miles away and trying to gain information from family members via the phone. Here is what I know so far. Machine is a 773 G with about 2000 hours on it, it has the digital...