Recent content by rwhitwo

yes and it was 12 V while cranking

Glad the Forum is back up. Still a problem. I replaced the battery connections and the voltage does not drop on the battery terminal when I turn they all the way to start, but still no voltage on the white wire leaving the switch. It is hard to believe that the new ignition switch I bought would...

Mike10- Thanks for the quick response. The key switch is wired just as you described, but when turned key to start now voltage on white wire. Replace key switch with same result. Replace white wire between instrument panel, key switch, and run/service switch with no change. I am so confused. Is...

Been working this a problem for awhile. Working through diagnosis flow from manual. Red wire into key switch shows 12 volts, but 0 volts on white wire going to run/service switch whether key in run or start. Replaced key switch - same problem. Checked grounds seem to check out good. Tested...

Been chasing this problem for awhile. Red wire into key switch shows 12 volts. White wire show 0 volts with key in run or start position. Replaced key switch - no difference. Checked grounds seem good. Stumped please help.