RWALTON699's latest activity

mikelv.....thanks for all your help. Problem solved!! It was the switch on front of the aux. spool. Switch bypassed solved problem...new...

mikelv.....I originally thought it was being overloaded, but actually...I think the engine is just shutting off.....thoughts??

When the engine shuts down is it because it is overloaded (you can feel the heavy load and engine stalling) or because it is being shut...

I did. I've read and re-read that post several times. I checked all fuses. I've not tested diodes, because I've read conflicting ways to...

Ok, so I pulled the relief valve....is there any way to tell if one is bad?? The only disassembly that I could do...is pull the cap off...

foton...thanks, again. When I pulled the the fittings off and tried it.....it still chocked the machine down. So, that wouldn't indicate...

ok ,that would make me believe that the machine is ok, could it be that your hoses are reversed and when you would think that you are...

mikelv...thanks. I've not pulled the relief valve...yet. Just checked prices...(wish this one was only $100). So, the relief valve can...

So, another non expert chiming in. I'm with brdgbldr and thinking that the relief valve on the aux circuit is the issue and not the...

foton.....I pulled the quick connects off....had flow. At idle, shoots a full stream about 6" out.

foton..thanks . I'll give that a try. brdgbldr mentioned that it could be a bad relief valve. Figured I would get one a see if that...

If you do see junk in there you will need to hook something to the outlet pipes into a oil catch container and engage the remotes to...

foton, thanks...It does have flow....but not free/unstrained flow. I can work the lever in quick...

I believe that the hyrdo circuit is not flowing causing the pump to dead head, it is possible that the hydro fittings are plugged up...

brdgbldr....Yes, it chokes the engine down, whether the hoses are hooked up or not. Thanks