Recent content by RussT

I dismissed the idea of calling the dealer... With the age of the machine and all. But I will give it a try. Worse they can say is no. I'm pretty sure my pumps are the updated pumps as they have the extended shaft with outboard bearings. I'm pretty sure this pumps is not rebuild at this...

Manual says you have to move the lever back and forth a few times until the motor starts working. Guessing to purge the air. You can try swapping the relief valves to see if that fixes the problem.

I'm looking to get two good new or rebuilt drive motors for my skid steer. Only place that "has" them online (Loader Parts Source) are out of stock and said they might get some in June. But didn't sound optimistic. My left went out and took the pump with it. If I'm replacing one I might as well...

Looks like I'm replacing the drive motor and the pump.... So by by money 💰🔥💰🔥

Just swapped pump relief valves front to back - right to left. Still no response from the front/left drive pump. It almost feels like the swisher plate is being "wacked" by the piston when the lever is moved to the reverse position. My assumption at this point is the pump is shot. Or ar least...

Here is the diagram.

If it's anything like my 1835B. It seems pretty straight forward. They pressure side is t'ed off the charge pressure line where it enters the lift and roll control valve . The return line goes into a port on the side of the Lift/roll CV. 1 Spool 15 GPM Cessna Double Acting Control Valve...

Thank you for the reply. When it happened chains where/was my first thought. Chains are good Hoses weren't disconnected until I did it Possible bipass valve issue on the pump. I'm going to try figure it out from the repair manual. It's possible the shaft on the motor is sheared somewhere...

I was moving a log with my skid steer and suddenly lost drive on the left side. Towing it out I realized that the left was "free wheeling". No loss off operations on the Right side or Lift or tilt. Luckily I was able to use my sister's tractor to get it out of the woods and on a trailer 😁. My...