Recent content by Ripper

I got it running. Thanks to all that helped me in the learnings. The trouble came from the connector at the fuel solonid. One of the spades was burnet. the spade was burnet to the point that it was short and would only reach when I pushed in on it with my thumb. I used a wire spade terminal cut...

I have pumped fuel through the last banjo fitting( end of the supply line). Loosend injector supply nuts.I have two wires connected to the pump (black and Red) red is hot with the key on. I cranked it over several times and got nothing through the pump to the loose lines going to the injectors...

First off thanks for the tips. I have cleared the cannister of air by pumping the bulb and bleeding it through the screw on top like a person bleeds a brake system. The line leaving the cannister goes to the side of the block through a banjo fitting to what I assume is internal injector pump...

I have an 843 desiel that I ran out of fuel. I cant get it to start after adding fuel and bleeding air through the filter cannister. This thing is new to me and I cant find a way to bleed lines through the pump. I have no manual to look at either. It appears as though the pump is built into the...