Its amazing how many things you will wind up using pallet forks for if you have them. They are great for lifting things either from underneath, or from above with straps in addition to pallets of course. I use mine at least as often as I use my bucket
All I have is the new Holland part number I listed in the post....219609. That's supposedly the part number for the fitting I need to screw into the valve body at the power beyond port.
If you actually have the aux hydraulic plumbing then pulling with good pictures and measurements would help a lot ...looking at other manufacturers pb plugs the cap doesn't go in as far...the actual fitting should go further in and the protrusion actually blocks the channel the fluid shunts...
I have an older skid steer and the right hand stick was working until today and it still works fine in reverse. If I push hard against the stick it won't go to the Forward position very far but the right hand wheels will turn slowly while pushing forward the little movement the stick allows so...
I have an older skid steer and the right hand stick was working until today and it still works fine in reverse if I push hard against the stick it won't go to the Ford position but the right hand wheels will turn slowly so I don't think I have a motor problem when I pull the plate under the seat...
I tried to order it from Messicks and they said it was discontinued and unavailable from any of their obsolete equipment suppliers also when I try to reply to your post I get a server error.
Looks like I posted this to the wrong spot. I am still looking for the fitting that goes in the main hydraulics valve to provide power beyond flow to an auxillary valve. Failing being able to buy one decent dimensions and maybe a picture should let me fabricate it on my lathe
I have an L779 that I would like to add aux hydraulics to. It was an option its just mine doesn't have it. There is a plug on the main hydraulic control valve that is meant to be where you plumb into - I think the term is its a power beyond hookup? Anyhow it needs part 219609 that they don't...
I have an L779 that I also want to add aux to. Looks like it needs the same 219609 that you couldn't find.... I don't suppose anyone has a decent picture and possibly dimensions of one? I have a lathe and could possibly make my own.. I've found the actual aux valves used online but not this...