Recent content by Rgerek

Yes you see the rpm, voltage everything except the dummy lights on the panel

Ok I am going to trailer my 8875 for the first time, I understand the back end chain points but the front end I do not understand. The chain point is below the bucket on the frame how do I get a four point connection with the bucket on? Why can't I just use the grab bars on the lift arms. Any Ideas

Ok, here's the problem I only have one light that lights up when I sit on the seat. Every works on the skid except the lights. Do you think that 17 bulbs could be burned out? The bulbs are not cheap around 8.00 a piece and I really don't want to spend the money if the whole unit is dead. The...

Update--------- Removed the linkage and the hand control works fine, clamped the valve with a vice grip and lightly turned it and broke the rust free. Reconnected the linkage and after a lot of movement of the lever and the valve works now. Thanks everyone....

The aux control is on the right hand drive control, you move toward the drivers seat or away from it, the linkage moves it bows out the bottom linkage because the valve does not move. I was wondering if it has an electrical stop for a safety lockout. I have tapped the valve and used a...

No it's linkage I can see the aux valve and it will not move. I could tap it very small hammer but I don't know if I would create bigger problems?

Hello, new to the forum, I got a 96 or 97 8875 for free, everything works except for the aux hydraulic control, the valve is stuck in the neutral position and I can not get it freed up. Any Ideas?