Recent content by Rezmotorcycle

did you ever consider an auxiliary valve body located in an easier location? I did had a spool valve that leaked , and I bought a 26 gpm auxiliary and mounted it in a easy to reach location. I Had to replumb the hydraulic abviously

Well I found out the 2 gears inside the box that runs the main hyd pump and belt drive are bad. i also see that the john deere 170 and JD24 appear to have the same box. the gears are not available however and i have scoured the internet looking for the gears . the only company I found have a...

I know this is an old thread but I am having the same issue with the drive box for the 1700 mustang did you ever find one?

Was using the mustang at a neighbor's yard , when it started vibrating very much, then sounded like a knock , then it got to run real smoothly. when that happened i ha no lift or tilt in the bucket and no forward or reverse. I suspected the hydraulic pump, but if that went out the belt would...

I am looking for the housing and shaft that connects to the engine and drive the pump and belt assembly on a late 60's to 70's mustang 1700 skid steer. The unit had a diesel engine ( and has a c201 in it now. the pump looks good but I am thinking the ring and pinion in the housing that drives...