Recent content by omcMustang

okay i figured out the problem the left pedal would only go in one direction heel down.. so i took the seat off and used an air bloser gun to blow all the junk out of there the linkage rod that goes into the valve would only go out not in but with a little help from a crow bar and pb blaster i...

i hooked them together and when i pulled lever back it went up but for the first time the engine didnt squeel.. am i supposed to push the heel down for the arms to go down or push the tow forward to make the arms go down? i bought this maching non running so im learning as i go how to use it...

still no fix.. there arent any electrical connections that i can see. when the machine is off the arms will go down slowly i tried jerking the auxilliary on and off.. can i take the connections off the end of the aux? will that help disengage it? Are there any tricks that anyone knows to...

i went to the local hardware store today and bought a multimeter im going to go out there now and take the seat off and do some more research and ill come back with the results

i tried the aux control back and forth a few times and nothing changed the lever on my right is my throttle there is a T handle in the middle that drives back and forth and turns left and right there are 2 pedals on the floor the right one opperates the bucket and the left one opperates the...

there is a lever on the right side that i beleive is the aux and i think when its pulled up its engaged and when its down its disengaged how would i know if its stuck on and how would i disengage is if its in the off position?

i have a OMC 442 Mustang skid steer has a v2203 engine in it al hydraulic functions work fine but my loader arms go up but will not go down when i pull the lever back and step on the pedal it wont go down but when i shut the machine off it will go down slowly...ive had people tell me its a check...