mrbb's latest activity

have a look at this video, if your tank lid is the same, (as I said in above post) this is a know way water gets into system its at the...

mrbb thanks and I agree.

sounds like water got into the system, I would suggest draining system as best you can, as till you remove the water your not going to...

if this is all you use machine for, then I highly doubt the benefits of a solid tire will do you any good, and NOT be worth the added...

Good luck with it. I agree it's a warmer weather job. In the meantime some new clean fuses and some electrical contact cleaner may be...

NO fuel filters won't have anything to do with grinding noise, but could maybe have some effect on smoke at start up, pending type of...

is your starter maybe sticking? and thus grinding after things get running? there should be no noise coming out of chain cases when...

To me it looks like your bearings are shot. You will need to remove the axle to see if there is any other damage. I wouldn’t think...

there is a good chance neither the inner race and outer race hav spun, it depends how long they have been like this

they have pro's and con's like any tire, it mostly comes down to what and where the machine is used as to justify solid tires or not...

I'm no expert, butt you most likely will not just need wider wheels, you will have to know what off set is needed for clearance, if...

might be hard to alter hour meter itself, but that doesn't stop folks from replacing them all together, with ones off ebay or salvage...

honestly I think as long as your using an oi l that flows in the temps you operate (like in very cold winter use ) and you keep it...

as long as the machine seems that the hours are correct , that is when you go look at it, wear and tear seem about on par with claimed...

MY suggestion would be to contact the maker and ask about if there is any GOOD will warranty, with it that close to warranty expiring...