From what I know, you'll need to get the slotted arm and the two springs.
Here is a link for my machine a L45 V 2203 Kubota Backhoe, the part should be the same.
Parts Link https://www.messicks.com/ku/85421?sectionId=220407&diagramId=372229
Look at the Engine section Governor Control and Speed...
I have a pan I took off my v2203, as my machine needed the original pan put back on here some pictures. If you can use it, I'll ship it out for $100. was about to put it on Ebay. You'll just need a gasket kit.
Thanks Foton, ended up taking to the injection shop, they put it on the tester and I could see all the ports were pumping just fine. It's common that all ports don't shoot up in the air.
Working on a V2203 the injection pump shoots fuel a couple feet into the air on #2 but just spills over the port on #1,#3 and #4. Just had this pump serviced. Took a spare pump and put it on and it shoots 2 ports into the air and spills over the other two. Is this normal? The engine starts up...
Not a Skid Steer but I purchased a backhoe Kubota L45 with a V2203 locked engine. Found the cam journals shot and the cylinder #1 shot as well along with the crankshaft. Purchased a reefer engine V2203 and just completed the changeover. Here is what I had to do. Went from Indirect injection to...