Recent content by MisterB

Finally got around to tearing into it. Removed wheels and chaincase cover to disconnect drive chains so I could tow it up the hill to my shop. The coupler between the engine and pumps broke loose from the flex plate. Thanks for the help. Glad it wasn't something more. Put new o-rings in one of...

The hydraulic pressure indicator light goes out when I start the engine, so I assume its getting pressure. I know the park brake locks the drive wheels but would it lock the t-bar also if the switch was bad? The linkage moves under the seat but there is no response. Thanks, Pete.

My 2060 quit working today. The engine starts and runs fine but controls stopped working. No tilt or lift with foot pedals. No forward or reverse with t-bar. Just before it quit working the steering acted up, not moving like it should to one side. When I turned the t-bar there was a ratcheting...

Try Golden Eagle Equipment. You can order parts for Mustang on their website. Excellent customer service. It helps if you have a parts manual to get numbers. Try ssbtractor.com. They have quite a few used manuals for older equipment.

I took an oil sample to the local Cat dealer. It was 40% fuel about 12 hrs after an oil change. So I'm thinking injector pump problems too since it runs pretty good except for some white smoke which just started recently. I'm hoping the smoke is caused by engine using more oil because it's so...

Hi, I just bought a 1997 Mustang 2060 skid loader to use building a house on our land here in N.E Kansas. It has a Isuzu 4JB1 diesel with about 3200 hrs. Did a little digging and played around some. Noticed oil pressure light coming on so I installed a gauge and pressure seemed ok. Around 60 to...