Recent content by Mike D

I wonder is there anything I can add to the hydraulic pump to quiet it down? It’s a older machine 1994 6675. Just wondering

I used a big pair of channel locks to get mine off one time. I’m sure you know this but it’s right to tighten and left to loosen. Good luck

Thanks to everyone that replied, I found the problem after all the relay replacements, wire testing, ignition switch, fuses….. it was the last thing I t looked at. The starter! I pulled my 7 month old rebuilt starter and it was bad, I was shocked. After I pulled it I looked at it and the label...

I have grousers as well on my JD 6675 and they are great. The only issue is if when I’m pushing debris and there’s bricks or broken concrete it tends to get between the track and tires and I have to stop the machine and throw it out.

Thanks for the info, I changed the starter relays, I changed any relay I touched on the firewall. I was wondering about the ignition. I will get a new one and try it, I was also wondering about the breaker on the firewall that looks like a solenoid. I’m about to run out of electrical parts to...

We’ll I replaced all the relays, cleaned the battery terminals and gave it a try, nothing but a quieter click and now it blows the 5amp fuse for the dash. What’s the chances it’s the ignition switch? I even hooked up my diesel truck to it with jumper cables to make sure it wasn’t the battery...

I’m dealing with that right now also, I’ve checked the battery, battery terminals, fuses, connection. I just went and ordered all 4 relays, 1 was bad for sure my intake heater was on. I’ll let you know Saturday or Sunday if it worked.