Recent content by matt681

What about fitting a bolt on edge? Like used on excavator mud buckets, or I know at work we use a product called arrow edge, it just welds on but I have no idea what it's worth.

The steel retainer ring was worn to a flat on one side, I'm assuming that was why it let go, the machine has a bit over 2000hrs on it.

Also I was running a 4 in 1 bucket witch I was closing at the time the hose popped off.

Thanks for the help guys, I ended up making a tool out of 50x3mm flat bar, drilled a 16mm hole in the plate filed the hole out bigger since I didn't have a bigger drill bit, cut too the out side of the hole to make the c part, run a strip of wield down either side and ground it too a wedge...

Thanks heaps for that guys, I'm at work now so il go and knock up at tool quickly, any ideas about the o'rings and that?

How ya going guys, I've got a s130 that's popped the hose of the hydraulic oil cooler on the right hand side, I assume it's running back to tank? I brought a seal kit for my dealer but when I fitted it I must have got the o'rings in the wrong way can any one tell me witch way they go? In the...