Mike - checked aux neutral switch, seatbelt switch and seat switch - turns over well but will not start in run mode - fires right up in service mode - checked all solenoids and the diodes - all good - something is inhibiting fuel in run mode - has to be an interlock for fuel?
Help - I have a 2004 LS180.b that will not start in normal mode. It acts like no fuel. The seat belt switch is working and it has fuel. In service mode it starts right up. What would actuate the fuel cutoff? Any help with this would be greatly appreciated.
Thank you all for the suggestions, I will work on these today and get back to you. The machine works fine and runs unless I use the aux hyd - then it shuts off, but restarts and works fine - this is in both directions of the aux hyd lever - right control. I have the workshop manual and the parts...
A bit of help would be great. I have purchased a 2005 LS 180.b and it seems to work fine, but when I actuate the rock hound we purchased, it starts to work then the thing shuts down and the EIC looks like it is doing a reset. I hope it is a simple repair as I am at my wits end the wife wanted to...