Recent content by Linelife

Pulled the flushing spool out and checked things out. Looks like new! We did a little more sound checking and we followed the noise down to the build up valve where it was louder, but that led us to the hose that goes to the cross port relief valve. I'm completely lost why while running the...

Well, I brought it in and had the pressures checked. Everything was where it should be. They told me that they had no idea what the sound was but probably nothing to be concerned with. Well, I don't buy that... I did a little more playing with it and once the oil warms up, it seems to do it...

So, here's the issue. I was digging a hole and lost all hydraulics. Turned out to be the plastic coupler between the flywheel and the pump. Less than 2 hours later, same thing happens again. There was a 'hum' that started whenever I'd use the thumb which turned into every other control too, but...

I bought an electronic copy of the manual and printed it off thinking that I could save a buck. OfficeMax charged $90. Just as much as it would have cost to buy the manual. Also, kinda a pain in the a** organizing it all.

I brought the pump to a local guy working out of a Quonset (best kind, imo), and he said even by changing the O-rings on the delivery valve stems will throw off the injector pump. So, basically if you loosen anything deeper that the injector lines off of the pump, you will have to bring in the...

That's what I was afraid of.. I guess time to bite the bullet and pay someone else to work on my equipment. Grrr... Thanks Tazza!

So after extensive interneting, I think my problem lies in the delivery valves. I tried to set them to where they were, but I still don't have fuel coming out of cyl #3. Is this something that has to be bench set? Pull off the entire injector pump and bring it to a shop? Also on a Denso pump, is...

Hello, I have a 2003 341 Midi-x and it started to lose power, like a plugged fuel filter. I changed the filter and it still would bog down if I did any heavy digging or 2 functions at the same time. I started poking around in the engine compartment and found one of the distribution valve O-rings...