Recent content by Lb1996

Help Support SkidSteer Forum:

  1. L

    763 engine boggs down while reversing

    Ok. So i drained out the filter and alot of water came out; about a cup. Probably wouldnt hurt to replace it some day. Got about 6 inches of snow last night. The machine is running a little better now. I was going backwards with the sticks all the way back with a decent amount of throttle up and...
  2. L

    763 engine boggs down while reversing

    Wheres the water seperator ??
  3. L

    763 engine boggs down while reversing

    Boggs down real fast if i try to reverse while using arms and tilt. Never did that before.....
  4. L

    763 engine boggs down while reversing

    Its a '96. Doesnt have a code readout or any fancy bells and whistles lime the newer ones. We try to diagnose everything through feel during usage. Cant put a aux pressure tester on right now but arms and tilt work fine, forward works good, even with an engine load, but reverse with a load...
  5. L

    763 engine boggs down while reversing

    Aux hydrolics seem normal.
  6. L

    763 engine boggs down while reversing

    Yes. Forward works fine. Reverse is the issue. I can put the throttle up higher and it helps the problem but there is still bog with tons of black smoke coming out.
  7. L

    763 engine boggs down while reversing

    I have a bobcat 763 with approx 2500 hrs on it. I had a crack in the cylinder head and had it replaced about 6 months ago. Since then, whenever I'm backblading in reverse with a light load against the engine, the RPMs drop lower and lower to the point where I have to stop moving and let the...
Top