Recent content by jsp17268

please help I have an 853h and I cant ge the high flow to work I have checked both solenoids and verified they have power and are working, my question at this point is do I have to do anything more that engage the aux hydraulics the turn on the hf switch to have high flow hydraulics? I am open...

we run a 25% used motor oil in all of our equipmnet and have had no problems, we just mix plain old ag diesel, just filter it well

I have an 853 h and cant get the high flow to engage, I have 12 volts in and out of the hf switch, it is an older machine with the hf switch down by my left thigh. I have a service manual but it appears they skipped the hf section for my age machine, any ideas would be greatly appreciated. btw I...

I found the drive belt today and it is pretty well shreded and very loose. I tightened it up and about 90 % of the problem seems gone. I am going to get a new belt tomorow. also I found out my dealer is $30.00 cheaper for a shop manual than what ebay was.

also what it seems like to me is the pump is starving for fluid. the is no abnormal resistance on the stick when the machine stops moving. Is the just the 1 spin on hydraulic filter?

no just feels as though you loose all hydraulic drive as if the pumps quit working

we had one that was a little older than that and it was pretty bullet proof, I would just want to push against something solid and make sure the bobcat will spin the tires with no weird noises. ours was a simple and good machine.

I just bought a 853h that will move a little then stop, will move normal for 30 seconds at wot the stop. will move again just above idle then stop, then will move a little if the machine is shut off and restarted. I am hoping hydraulic filter but I cannot even find it, so any help would be...