Recent content by Joby

My information is that a quick hitch is hydraulically operated and a half hitch is spring loaded and hand operated, but I could be wrong, it happens all the time.

Thanks Tazza, I did some more investigation and found that the problem was a failed 'O' ring in one of the releif valves situated at the rear of the control valve, and like you say it's a bit difficult to get at. I appreciate your advice though and will keep it in mind for possible future reference.

Can anyone help me with where to get a design for a quick hitch or half hitch for a mini? Thanks, Regards Joby

Can anyone advise me on my problem: My 743 lift arms drop slowly on their own, it takes about a minute and a half to fall from full height. I replaced the lift cylinder seals as this was my obvious conclusion, but it is still the same. since re-assembly I have checked the cylinder seals for...

You should be able to buy what is called a 'splined hub' that conforms to your yoke spline style from any major hydraulics supplier and then get it welded onto your yoke (your yoke may need machining to take the hub) but any machine shop should be able to do the work. You can also buy the...