Recent content by jjenks01

It was more of a 4" movement. I will be taking it into the Bobcat dealer sometime this winter. Because I just replaced the bearings and races makes me think it has some thing to do with that. Thanks for your post.

I just replaced the inner and outer bearings and races so the bearings should not be worn. I jacked it up and turned the wheels. I can only turn them about 1/4 turn each way not completely around. Same for both sides. It seems like this problem started after I changed the bearings and races. I...

Thanks for the reply. I thought if someone replied it would show up on my email. Anyway I will try that. I did take the covers off and the bolts holding the chain gears are tight. So I will jack it up and turn the wheels plus try and pull the wheels in and out to check for end play. If I notice...

I just replace the bearings and races on my 753 bobcat axles. The right rear was in bad shape. Now when I am using it and pull back on the right control it seems to grab and really react. Spin around. Generally this is at high throttle. I have retightened the chain bolts nothing was loose and...

I just replace the bearings and races on my 753 bobcat axles. The right rear was in bad shape. Now when I am using it and pull back on the right control it seems to grab and really react. Spin around. Generally this is at high throttle. I have retightened the chain bolts nothing was loose and...