Recent content by jeff4605

Thanks Shawn, I was ready to pull the trigger on a rebuilt drive motor, but the guy at the pump shop said sounds like "relief valve sticking in your hydro-stat" and it was easy to tell if if is that by swaping them (left to right) and seeing if problem moves to other side. Do you have experience...

Hello, My 753 has no power in when pulling the right stick back. I have adjusted all the linkage and even replace bushings in linkage. I can see it rotating the Hydro shafts when cab is up, so not slipping on shafts. only does this on the right side, and moving lever forward seems fine. Can this...

Thanks Tazza, Update, linkage is snugg and adjusted, and I have noticed it's only when I pull the right joystick back, pushing forward is smooth. pulling back slowly on right side causes sudden jerk. Any idea's welcome Thanks Jeff

dipstick part number is 6677202, and tube is 6677203. you can order at any bobcat dealer.

I have a Bobcat 753. When operating the machine, if I pull back slowly on the left lever it turns smoothly, If i do the same on the right lever it makes sudden jerk. is this an adjustment or pump issue? Thanks for any suggestions.

I have one in PDF format, send me your email

Anyone have a easy way of replacing the plastic blower side vents on the 753? the rear 2 screws are almost impossible to get to.

I recently had to replace the rear cab glass in my 1996 753. I ordered from dealer, and it appears to be the right shape but to small. the part ordered was 6701651 and dealer said it was subbed to 6729730. Is there any info on dimensions of glass? I would have thought this a pretty standard...

Thanks, this Forum is GREAT! great idea's..

Thanks skidsteer.ca That sounds easy. I guess next question is a puller need to get hub off tapered axle or can a hit with a hammer pop it off?

Thanks Tazza, So is the front fill plug connected to the back axles as well? or are they seperate tanks? I need to replace the rear seal. If the loader is on an incline the fluid drips out of the rear axle. I did find a maintance manual, it says to use same fuild for chain case as used in the...

My 753 nneds a rear axle seal replacement, where is the gear oil fill? Do I need to remove the top of the chain boxes just to add oil? and if so, what is the level of fuild? and what is the recommended fuild? Thanks

Anyone have link to PDF manuals for Bobcat 753? Serial number is 512728182 Thanks Jeff

I have a Bobcat 1996 753 with backup alarm. I realized the prior owner removed the acuators on the micro switches for the backup alarm. I replaced the swithes, but the alarm is so faint you can only here it when the engine is off. the low, medium, loud switch on the alarm makes no difference. I...