Recent content by jazzyjeff

O by the may days of trouble shooting its the controller. 667806 pn inside it is is all corroded due to salt. Just painted it though looks great ill get some pics up.

I had emailed you ken hopefully we can work out a deal, i got some attachments for sale or trade..

turns out it is the computer. 800 and they have to updater it. It this BS or accurate? Can i swap one from a use machine available fine one on eBay.. Has anyone had to swap out the computer with a used or a borrowed one (773) same machine or will it fry the computer? what tels me it is the...

Yes Fishfiles i checked all the connections up in the controller area, remover both controls looked at all the connectors on both the panels and wires which were clean didn't see any obvious signs of rubbing of wires or pinching etc.. If it were a or both panels though wouldn't it do it as soon...

Found some broken wires on the spool lock solenoid.Then after running it around it gave me the fault code 1806 so hopefully this may correct this issue as it is only a 50 dollar part due in Tues or wensday.

When it shuts down it has power and the engine just shuts off. Before the engine cuts off thou all the safeties engage and you come to a abrupt stop, then the engine shuts down but the dash/hour meter stay on stating input. Then I have to turn the key off and restart the engine. I have tried it...

Thanks Webster, I didn't remove them at all while painting the machine, I kinda did a quick paint job to make it look good for winter . I have already after painting the machine, took off both panels and checked for corrosion/loose connections. I looked up in the manual that it means they are...

I have a 01 773g that has been acting up latley. It will not give me any codes, It runs fine for 10-15 mins then starts acting up and just states " input" on the screen. It seems to be doing most it when I make a jerky movement or turn or lower the bucket down and let it slam. It will start...

I needed to know what this error code meant this other day and was able to call the dealer. How do you guys do it? Is there a some sort of reference manual or it has to be through the computer at the dealer? Thank Jeff