Recent content by jawollbrink

Hi guys, the front axle seals on my 89 L555 deluxe are leaving, one is really getting bad. How do I go about replacing? Do I need to open the access cover to the chain case? Anyone have a diagram from a shop manual? Thanks! Also for those who have done these, I am thinking the parts I will need...

I bought mine a few months back from a friends mom. His dad had used it a little around the farm but passed away a couple years ago and the machine sat idle. They had taken it in to the NH dealer to get it fixed cause they couldn't get it to start but NH told them the motor had no compression...

just an update, it had nothing to do with the hydraulic control valve, luckily I hadn't tore into it yet... I found it was a problem with the seatbelt logic board. The seat switch was working fine, 12 volts coming out of it when contact was made, but the two solenoids that control the boom and...

alright, thanks for the advice. I am gonna try changing the filters and cleaning the suction again. If that doesn't work then I will rebuild the control valve. Thanks again, jason

I need a rim for this machine, its a six bolt and I believe 10 inch.

I recently bought a L555 with the kubota that was taken by the lady to the dealer, who told her the engine wouldn't start cause it had no compression. I ended up finding that the injection pump needed rebuilt (relief valve bad, and rack stuck in off position) I fixed this and the machine now...

I don't think its the seatbelt switch because the light goes out when I sit/ comes on when I stand. Also If I switch to aux hydraulics i have pressure (I know this because I have a small leak in the aux line that shoots fluid out if I switch it over). The cylinders do move some, it just sounds...

Hi guys, new to the forum.. I recently bought a cheap L555 deluxe that had been parked for a couple of years. Supposed to have run fine when they parked it. I ended up rebuilding the injection pump on the v1902 kubota and got the engine to run like a top, then I had to add 7 gallon hydro fluid...