Recent content by Hunterdog967

It ended up being hydraulic control valve safety port solenoid valve assembly. I was in the field working on this machine so the machine provided its pressure resistance test . What equipment would you recommend to do this test your talking about ,thanks

TR 270 having an issue with this machine ,after sitting in seat an powering up parking brake light not staying on and machine wont crank . checked battery seems to be good voltage there so i checked fuses and bottom fuse panel has no power . Anyone have a schematic for this machine or any ideas

something similar happened to me and it was the 10 amp fuse for operator cluster

just to update the right side hoist cylinder had failed internally so I had both cylinders repaired and resealed . Still having an issue with hydraulic system chattering violenlently at slow lowering of hoist cylinders and under load it seems hoisting . Messing around I have discovered when I...

I have a 320 John deere that chatters violently going down especially from highest position and screeches a little at beginning of going up. I've greased pins and it's still doing it. I'm thinking it is bushing pin damage and removed 4 pins and there not bad enough to cause that. Could it be a...

There is a electrically controlled hydraulic lock in the main control valve for the hydraulics that is Not releasing just wondered if anyone had a schematic or has run into this issue like I said the parking brake will release and it will drive but the Hydraulics are locked so pocket won't go up...

Hi i am having a problem with a s185 hydraulic lock not releasing ,machine will start and drive but the hydraulic lock that is electrically released doesn't unlock ,any ideas .