hatchet's latest activity

If you haven't done so yet, download the service manual for whatever model you have. You're not going to get any kind off accurate...

Thanks for the good info!

I put a guage at the low pressure sender port and get 60 psi.Is that high enough.

Any time checking pressure on a function I always "T" into that function, I used to keep a 4 foot 1/4 inch hydraulic line around to get...

I believe all Bobcats, and other skid steers for that matter, are self purging on startup. When I change oil, I fill the hydraulic tank...

I just found out i screwed the guage into low pressure sender port.

Anyone know if i have to bleed the air from system when i replace theis filter on a 721.

I have a 78 bobcat and i screwed a pressure guage where the hydraulic temp sender was and got a 0 reading.Is that the wrong place to...

I found the sender near the filter.I put a oil guage on it and it reads 60 psi.I cant find any specs to know if thats good i just found...

According to your description, it could be a faulty sensor or loose connection.

When i hit the bucket pedal a red light flashes on an off.It takes about 20 minutes befor it happens All fluids are full.I dont know...