Recent content by GVations

@Shanmar i’m heading down to machine now but the instrument cluster is pretty basic, it doesn’t have a temp gauge.

@Shanmar so the coolant temp light & alarm are still going off. After changing the fan bearing and taking out sensor to let air bubbles out the light was off when I first started it then came back on. I plowed for 5 hours yesterday and it was on for most of the time but would shut off and come...

I’m pretty sure that’s the cigarette lighter” / power supply. Was looking to plug in my phone while plowing and ordered one for my l185. It’s European size plug or something so had to get the adapter to plug in usb.

Ended up just pulling the radiator and oil cooler just to make it easier to work. Had to pull the shroud off to get to the four bolts ( in each corner) that held the oil cool in. Feel like you’d have to pull it to get the fan out although I was looking at the diagram on messinicks and it...

@Shanmar I have to replace the fan bearing tomorrow too, are you familiar with those at all? We were going to disconnect radiator and hydraulic cooler to get to the fan, wondering if there is an easier way, or if that’s the best way to access it.

I did check the wiring, everything seemed to be tight, looked like it may have had a bit of corrosion so unhooked them and hit them with a wire brush but no luck. I’ll try pulling the sensor tomorrow to see if there’s any air bubbles. Would you top it off from the sensor if for some reason...

I drained and changed the coolant in my 2007 l185 New Holland skid steer and also pressure washed it. The coolant temp light and alarm has been coming on since then. It’s definitely not over heating. Not sure if a sensor got hit or needs to be reset after changing coolant or possibly a wire hit...

Hi my 2007 NH L185 stalls when I get out of seat. It started last year when I was plowing, I lifted up off the seat to adjust my pants and the parking brake engaged. It doesn’t do it all the time only after running machine for a while / when it gets hot. When it happens the machine stalls out...