Recent content by GerryB

Thanks to all who replied with suggestions based on experience. I raised the cab today on the 763...no obvious oil leaks which was my concern. Dusty in there but no fresh oil evident.

Hope to have time to lift the cab this week. I did notice that the dripping seems to have stopped. Last week I pressure washed the entire unit after using, there were no drips beneath in previous days but for a couple days following the wash, it dripped. Water and hydrostat oil I understand...

Your's shown in profile may be even cleaner. Our Cat decal on side of bucket is worn off. No experience with hose life? Had a Vermeer tree spade that was a spider web of hoses. Sold it when the first hose began to weep. Figured the rest would go soon. All of them required replacement within...

Thanks for the directions. Will cable or use secondary safety when raised. A little trepidation setting in. I purchased the 2001 model 763 in 2001, it was a local school trade in. They trade every year and had less than 200 hours total time. I've never used it, left it with our daughter and...

What is the procedure to raise the cab on a Bobcat 763, believed to be 2001 model. We have only 500 hours total on this machine that is seldom used. Apparently we have a hydraulic leak as oil is detected dripping beneath the middle of three bolts on the bottom skid pan. We would like to...