Recent content by emilyjohnson85

The weak track motor and difficulty lifting with the boom suggest that you could be dealing with low hydraulic pressure or flow, possibly from a worn or malfunctioning pump. The fact that it only performs well at high RPMs points to a potential problem with the hydraulic system not delivering...

Sounds like you're dealing with a hydraulic issue, possibly related to the charge pump or a failing hydraulic pump. If the machine works for a bit and then loses all movement, it might be overheating or losing pressure. Check if the hydraulic fluid is overheating and ensure all connections and...

If the new glow plug module didn't resolve the problem, there might be something else in the circuit that's off. Check the signal voltage first—10.5V is a bit low, which could be causing the module not to activate. Also, verify all ground connections, as a poor ground can lead to faulty...

It sounds like you've partially solved the problem by clearing whatever was blocking the fuel line. If your Bobcat S750 doesn't have a pickup screen (as indicated by the parts catalog), then you likely didn't blow one off. The blockage could have been caused by debris or sediment in the tank...

It sounds like you've covered the basics, but there could still be an issue with the radiator. Even if you're pressure washing the fins, debris can sometimes get trapped deep inside or on the engine side, reducing airflow. I'd suggest checking the radiator for any blockages from the engine side...