Recent content by Dutch

OM, thank you for the link to the service manual, it’s exactly what I needed. My engine is a 200 series and I found the correct fuel bleeding procedure in the manual. I purchased a primer-pump bulb, cleaned the fuel cap with diesel and blew it out with air and there was already an existing cut...

Yes THANKYOU, this is a big help. I do not have a service manual or an electrical schematic for an 843 but need them. Is there a link that you can send me for these items? Thanks I appreciate your help, and you too Antfarmer. This is a wonderful forum and I appreciate all the help from you...

No I had no problem prior. I was doing routine maintenance, removed the fuel tank, cleaned it out, then put in new fuel filter, cleaned the settlement bowl and that is where I am. There is no bulb anywhere on the rest of the fuel line. My fuel tube goes from the tank to the fuel filter with no...

Apologies, we've tried everything, can't get to the answer. Can you copy and send it to me? Thank you.

I've tried to search as you stated, however I see no reply, or post.

I need to know the procedure for bleeding my fuel system. I changed the fuel filter on my 843 which has a Perkins 4.154 engine. I need to know what is the procedure for bleeding air out of the system, if required. My Bobcat is equipped with the long gold tube that says “fuel in” and “oil out”...

Hey Taryn, Thank you for your help. I fired it up! Turned the key to the left, had glow plugs, turned the key to the right, it started, panel good, ran for about 20 minutes and then died. It's done this to me before, I know it's a fuel problem, so I will start by removing the sending unit...

What is the relay? I don't know what relay is. Is it the Solenoid you are talking about? Maybe these pictures will help. Is it the fuses on the instrument panel, or is there another fuse that you are referring to that may be blown? Let me know if these pictures clarify. If not I will send...

I’m Bryan, and I’m a new member of the forum. I bought a used Bobcat 843 Skid Steer with 54 HP 4-cylinder Perkins diesel that I have used less than a year when this problem occured. It is probably an early 80’s model. I searched the forum for similar electrical problems and found RW’s...