Recent content by DonaldDuck

We still get this error on our machine. It still only happens when it rains, so it is some sort of intermittent harness electrical problem. Cleaning the solenoids no longer fixes it. What we have to do is remove the right rear tire and the access panel behind it. At the bottom of the tub is a...

My A300 has the LCD and keypad on the right hand side. The error was Right Swash Plate Not In Neutral. I forget what the code number was and I can't look it up any more. I have had no more problems with the machine since I cleaned the solenoids, put dielectric grease in the solenoid connectors...

I went to the dealer and talked to them about the problem. They have never replaced a swash plate sensor on an A300. I checked the parts department and they have never sold a swash plate sensor for an A300. So it probably isn't the sensor. We pulled the tire and the side plate to get access to...

The error is 75-18 IIRC. Right swash plate not in neutral detected. Nothing about uncommanded wheel movement. We've watched the wheels during start up and they don't move. I've got the shop manual, complete with wiring diagrams. How does one get at the underside of the pump to change the sensor...

Why don't my posts have paragraph breaks in them ? I put them in when I edit ?

I have an A300 with about 6500 hours on it. The machine works great except that once in a while I get a Right Swash Plate not in Neutral error. The engine will fire, run for 3 seconds and shut down when this happens. The first time it happened the machine was new to me. The tub drains were also...