Recent content by DL9191

Thanks , once again you have saved me a ton of money.... Happy New year

Thanks Zanman, lifted the cab and found a cable pinched in the main joy stick shroud. I guess i was in a hurry to get it back together....im getting good at taking this thing apart! Appreciate the help Doug

It usually bucks more if there's no weight in the wheels ...get the wheels filled w ith foam and it won't bounce so much

I checked my codes and it's giving me a 32-65 in the book it's sensor supply voltage our of range, im thinking it's a connector issue. I calibrated it when i installed them. Or at least it gives me the correct response. I haven't tried the foot controls since i replace the last actuator. The...

Just replaced the lift actuator on my 763 G after replacing the tilt actuator 6 mos ago, I recalibrated and started using it and it throws a ACS with 3 beeps and locks the sticks. The reason I relaced the lift actuator was I got the ACS beeps and locked the lift, not both... Could it be the...

Well I figured it out,, I actually looked in my manual and noticed there was a calibration procedure for the Hand/Foot models, it amounted to getting in, with key on (not started) hit the press to operate and bring both joysticks in and hold them, turning the key off and back on, you will hear 3...

I also have a "whining issue" I was told that its the drive belt thats loose, i checked and its really tight, so not sure if it could be adjusted tighter? For the time being I'm just ignoring the whining,,,, its easy to do

On my 2001 763 I have the foot or hand options for bucket control, I've always used the joystick controls for bucket lift and tilt, although I was never impressed with the speed of lifting a loaded bucket, just thought it was the nature of the beast, the other day I switched over to foot control...

Guys, REALLY appreciate your help here, finished this with no trouble. I can't believe the difference this made, once again, Tazza, OM, everyoone else that contributed, I really appreciate your help Doug

OM, I guess I would have eventually figured that one out, but thanks, one other question is the manual is saying to raise the bucket and block it off. Does that make this easier? Trying to figure why that would matter...

Thanks Guys, I do have the push to operate, so that makes sense now, I was just trying to picture how this was going to work. Thanks Again, Doug

I purchased a 763 with a little creep in it..there's a joke there somewhere,, so I have a repair manual and noticed there's a worn spot in the aluminum block that the idlers are sitting in , I'm assuming I can flip the aluminum block to use the other side, that is probaly the extent of the...

Thanks Tazza, Thats kind of what I was thinking too.. You've helped allot.

One more question and I'll quit buggin you,, my 763 has the 3 aux quick connects on the front and the variable/Hi flow options on the dash board is that indicating I have a H series? I can't find anythign that indicates what series it is, It has the triangle headlights. I also have a low and...

Thanks Tazza,,, I really appreciate the info.. I was assuming the linkage from the sticks running back to the pump was where the adj was. But your saying it would be at the pump itself ?