Recent content by divemaster920

Thanks...You guys are great. I let it soak with PB Blaster over night. Still had to use grips to get off, but it came. I have a temp coil on it from a WVO valve. All works like it used to. Do either of you sell these coils or where would you recommend I buy one at? So much thanks to you guys. Curtis

It only tested to .4 Ohms. I have never tested one that low...so probably bad. I took the bonnet nut off and thought it should just pull off, but it does not. ????Does it screw off? Thanks Curtis

I think this is the picture of it. Looks like maybe the lock solenoid is on the lower right. The one with only 2 wires going to it. http://i17.photobucket.com/albums/b78/divemaster920/th_bobcat004.jpg Thanks for your help. Curtis

Thank You, I believe the Hydraulic lock valve is located. In the center right under the steering adjustments?

Code 17-06 lift and tilt does not work. The machine would load down when trying to use lift and tilt, but not move, but now nothing. The light blinks 3 times. She has the triangle lights and can not find a fault in the ground system. I would like any input. Thanks Curtis