Dave the Ozzie's latest activity

Interesting, I have a 763 four switches on it, the front switch locks in the auxiliary hydraulics for my chain digger. The switch...

There’s an electrical connector on tails of all spool solenoids, figure out which is the auxiliary spool and unplug it. If the auxiliary...

I just had a wild thought on top what I suggested; you do know that the system has an electric lock out circuit don’t you? Mine is a...

I have a 763 which I’m guessing is very similar in the Hydroulics department. As KyMadMan said take no offence at any of our...

Yep, use the safety stops if the machine has them as the downside of using a prop is that most machines will rare backwards with front...

The large hose is the suction and return is teed into the suction hose behind the pumps. The small line is the return/bleed-off from the...

Thanks for the follow up, damn rodents. You would think they would find something better to eat??

Yes, they can do a lot of damage if the tapered pin come out, 15 months ago I purchased an old 763F (2,300 hours) that had been parked...

There are 3 chain case covers, the middle one has the solenoid that releases the brake and is directly above the drive sprockets of the...

I purchased a new one of these back in the day (sold it in 2007) and as already stated the floor pedals use two push-pull cables...

These machines usually have a case drain as standard unless it’s a highflow model. Mine is a HF and the case drain is simply tapped into...