Recent content by cornykid

Yes mine has the manual switch. I'm thinking my eic board is bad. It still counts down but will not activate the relay. What i did to get myself up running is disconnect the wire that came from the eic board (? Or wherever it came from) to the manual switch and then ran a jumper wire from the...

I have replaced the glow plugs and the relay. I'm not getting power to the relay. I have the eic, key and cab panels pulled out and I can't figure out what I'm looking for. Looks like the manual button has a green with yellow tracer and two blue with green tracers. I've tested the blue with...

Looking for some information on how to adjust the "neutral" position on this skid steer? Seem to creep to the left while idling. Thanks

I found NGK glow plugs at rock auto for $8.02 a piece. Part number 7464. Word of advice, also replace the relay for the glow plugs. Mine was sticking and burnt out my new glow plugs.

What does adding a weight kit to a LX665 do? Does it just add stability or increase the operating load? I am looking for some numbers to see if I need a bigger machine. Need to move some 1 ton pallets around every now and then. Thanks