Recent content by Cooper2215

Actually I have resolved the issue. First part was a wire rubbed through where the harness runs past a belt. Assuming the person before me had the harness changed but did not put one of the bolts back in to hold it in place. Second issue was indeed the solenoid. The new solenoids are wired...

I have figured out the wiring issue for 22-03. The engine will now crank over but will not start. It is letting out a little white smoke but not much while cranking. Anyone have any idea what else I can look at?

Ok so I have found 2 of he 3 problems and resolved them. I currently only have the 22-03 starter failure engin shutdown. I can not seem to figure this one out. Any ideas on where else to look

I have an 863G serial #5one4four5zero0six5. I bought it in the condition it is in. It has a new starter, alternator, battery and shut off solenoid. It cranks but will not start. It cranks 3 or 4 times beeps 3 times and then nothing happens. I have found it has 3 codes stored which are 22-03...