Recent content by cookieman

Had controller repaired. $600. All issues resolved. 8 volt power supply defective! Thank you ISOSCELL.

Some problem are solved but not sure what corrected it. Removed brake solenoid and everything is fine Now to figure what that wasn’t being energized. Went thru resistance check on solenoid and ok. Had already swapped relay! Next thing I know it works. But there is another problem. Engine coot...

2 hydraulic motors: 1 for each side. Machine was running no broblems before I changed wheel bearings and drive chains. I have no idea where and how to check charge pressure. Was thinking about removing brake solenoid to see it both sides will drive.

The reason I ask is that the bobcat was running great before I started working on it. Now the left side may drive forward for 1 or 2 revolutions. But when trying right side it appears locked up. Hydraulic pump is very noisy. When coming back 20 min later, right side may drive but left side...

The reason I ask is that the bobcat was running great before I started working on it. Now the left side may drive forward for 1 or 2 revolutions. But when trying right side it appears locked up. Hydraulic pump is very noisy. When coming back 20 min later, right side may drive but left side...

Old man new to forum. Glad to be part of this. Living in Florida

How to bleed hydraulic system on 763? Hydraulic tank was emptied and hoses to both hydraulic drive motors removed. Installed new wheel bearings inboard and outboard. Also 4 drive chains. New case drain filters also. Sometimes pump is very noisy. It this cavitation? Sometimes one side may drive...