Recent content by cjshocco

Well I finally got my drive motor back yesterday . The hyd. shop installed a seal kit. I was told $150 but it cost $360 . It took him forever to get the right kit. Anyway I got it back on this evening and it now works great . Thank you all for the very helpful information .

Hey my name is Chris . I guess I missed this section before I made my first post . I have a 753 that needs a little work . The guys on general repairs have helped me a lot . This is a great site . Thank you , Chris

I talked with the nearest hyd shop and he was almost ticked off that I had pulled it apart . I punch marked the housing and marked the position of the shaft and did not pull the shaft or rollers out. I am pretty mechanically inclined should I try to put the seals in and put it back together. He...

Oh yeah , thank you all for all the very helpful info . Without you guys I would probally still be scrathing my head .

I pulled the pump apart today the seals against the back part of the pump where broke apart and some of the pieces were gone . Think this was causing the problem ? I saw some seals on loader parts source for a little over $100 .

I got around to cleaning and getting at my Bobcat today . I looked at the linkages again and they looked good . I took the filter off that comes back to the hyd tank and it had five little shivers of steel, some small gray rubber plastic pieces , and about a tea spoon of trash. What do you all...

Sounds like yall know your stuff . This is a great site . I got home from work about 30 min before dark . So I guess another day before I get at it . Thank you for the lesson . Chris

Thank you , I will check that also !!

I got around to getting it up to my fathers shop to pressure wash it to do some checking. I noticed today that the right side reverse does the same thing kinda , and if you push both levers in the same direction at the same time it will not give trouble . If you lead off with the right (the side...

Hey thanks for the info !! I worked late today ,maybe I can get to it tomorrow . I hate to ask a dumb question but you have a idea on the size of the cap or plug I would need ? I'm really not good on hyd line sizes. Thank you, Chris

I changed the filter this afternoon no difference . No lights on . I'll look at the linkage in the next couple of days when I can get back to it. Thank you for the info. Do the replenishing valves ever give trouble and are they easy to check ? Thank you, Chris

Hey my name is Chris I just got this Bobcat when going forward the right side will stall for a second then it will go or if when it stalls if you reverse it then go forward it helps some. Reverse on the right side work fine and the forward and reverse on the left side work fine as well. The...