Recent content by chesapeake

do you have to post it to something i tried to cut and paste it from email but it would not paste

sorry for the delayed responce my dog chewed through the damn computer charger lol. i used my tig to weld the crack. and yes it was right through the output side of pump. horriable design because of all the virbritation. it really wasnt to bad because the pump was pretty thick. i dug out the...

it was a bad gasket on the sprocket bushing! all the fluid was passing by the bushing not allowing it to build pressure replaced it today and its working great. spent more time trying to dial in the the new main relief vavle i installed. Ps not the best welder or machineist in the world just a...

hooked up a pressure gauge and found that the aux peaked out a 1000 psi then droped to 800. i replaced the main relief valve and got the same numbers. tried to adjust the screw and could not get any more psi. took the pump apart when it was welded so all was exposed to the heat was the housing...

had a crack in my aux. pump. removed the pump cleaned everything up and welded the crack in the housing. put everything back together and fired it up. good news is the weld worked great and the leak is stoped. bad news is once i got it back i took it over to a pile of stone and after moving 3...