Recent content by chaz071

Can't help but some advice - once you get the pump add some fuel filters if not already, clean fuel will see that pump work for ages... I run 2 x CAV's plus original fuel filter.

There are lots of cases on the internet with the exact same problem, but for life of me I cannot find one person who has actually fixed it. I have noticed in that last few days that the seat light is staying on, and more than one of the wires from the sensor going back to the bics controller...

thanks Tazza, it has a boss system as well, I'd love to find the problem as a challenge but 3 or 4 days on the thing is enough. I am still running 12v straight to the bics solenoid, I know the bics system sends 8~9v but the coil winding is rated at 12v can't really see a problem. The mod I have...

Has anyone actually solved this problem, I am at my wits end. If the BICS system is modified to give loader operation when the traction lock is off how can this possibly be dangerous. I understand the risks of a loader that can lift the loader frame with nobody in the seat but in this setup it...

What about sending 8v to the solenoid then? It seems like nobody can solve this, I don't understand why I would have to buy an update for an older machine. It has a seat led that indicated that the seat function works fine, get out of seat - light out, sit down - light on. The loader hyd...

Hi guys I have an update, now I know it's a bad idea to modify the bics system but; I have picked up 12v from the fused side of the accessories, fed it to the bics hyd lock solenoid via a relay that is switched by the brake hold power. The machine works fine, if i put the brake on no hyd. lift...

Hi there new to the forum, hopefully I can offer something, does that engine have glow plugs? With low compression you are going to need some heat in there, also pump timing would be my thought. The advice to take aout an in injector is good but dangerous, make sure you have glasses on, I know...

Hi there guys, never posted before, great resource you have here, much appreciated. I hope to assist others from time to time. Was a plant mechanic years ago....... Anyway I am having dramas hoping somebody can help. 751c no loader hydraulics bics flashes short to ground (no short to ground...

Cheers tazza, i was reading your post about the burnt out one. I expect you're right. The motors both power forward eliminating the pump in my head. So does the right reverse hydrostatic circuit have 2 relief valves? Meaning the machines hydro drive sys has 8 in total?? Rob

Hi there guys, new to this forum hoping somebody can help. My 751c has nearly lost all drive to the right hydrostatic when reverse direction is selected. The pump loads up normally but the machine turns real slowly. Not sure yet if it changes when cool. Not a drive chain issue, reluctant to swap...