Recent content by cbucner

Yeah , it's a good thing the noise it makes. I can hear it when the engine is on glow plugs. Today it was really cold -5F . With the mods I did it started , kinda rough in the begining but that's because i did not use the block heater. It takes 2-3 secs for it to run good. So if it started in...

Thanks guys for the replies. I used a napa pump , it looks like it's a vibrator pump from the noise it makes. and I replaced the 5/16 hose with a 1/2 hose. from the tank to the pump I have 5/16 which is about 1"long then another 1" to the filter and then 1/2 to the injection pump. From what I've...

Hello guys and happy holidays! As you know by now I'm using my LS125 for snow removal and is pretty good. I finally installed the cabin heater and i'll post some pics soon for all the 125 owners if they want to do it but my main concern is that in temps that are lower than 20F the machine...

It's not that easy. My engine has the thermostat inside the water pump and there is no access to it unless you remove the pump. I'm in trouble. Any other way to install it? Thanks I attached a link to the pic from the service manual.It's on my server...

Winter is here and I already used my 125 for snow removal and I'm impressed with it. Now I got a cabin heater from curtis and want to install it in the machine but the problem is how to install it on the water circuit. The hoses look like around 1.5" and the heater is around 3/4". From what I've...

Tom , where's that fuse?? the 30A fuse? I've seen two things in the engine compartment that looks like fuses, but they look moore like a strap or a cap for the wiring. I would really love to share some $$ for that manual if you're interested and can email me a copy. Let me know. Thanks

Forgot to post , the machine starts on "service mode" but in operation mode doesn't so it can't be the solenoid for the fuel. The boom doesn't work , even in service mode, everything else works.

"timer" can't be the preheat glow plugs since it turns on once you sit on the seat and it stays on a while after you get off the seat. It must be something else.

Ok , I checked the seat switch , and indeed that was the culprit. One of the wires was cut by the seat bracket. I fixed that , then the light for the seat belt went on. Everything fine but the engine won't start!!!! So I tried to do everything in order, I sat on the seat , the light for the...

I got an LS-125 and today when I turned the key on the light for the seat belt didn't light. I plugged the seatbelt a few times but still nothing, so I can't start the engine. I put the box on service mode so i can start it and ran a jump wire for the boom valve so I can operate it. Checked the...