Recent content by catfish

Yep, just push the rabbit and that should engage the 2 speed option. It will "road" at approximately twice the speed. Like mentioned, use the "turtle" when working the machine.

Your engine would run like crap if the turbo took a dump.

Thanks Ken. I have an SJC machine if it makes any difference in parts. I will look into calling my dealer if it is a kit. Thanks again.

Howdy folks. I have an S220 I bought brand new a few months ago. I see there are two wires in the middle of the rear door, is it for a back up alarm? If so, is it a direct plug-and-play? If the wires are not for a back-up alarm, what are they?

If it ran fine the first night, then started getting the hot exhaust, I would check your distributor hold down to make sure its tight. If you didn't get it good and snug it may have "walked" a little and the timing is off again. The hard start starting sounds like the timing is off.

Good advice guys. I just got off of the phone with a contrator friend of mine that owns three Bobcats. 2 of which have SJC controls. One is an '08 and the other an '09 he has well over a thousand trouble free hours on both machines. He has been very happy with them. He was actually unaware that...

It does have the 3 year SJC warranty. We don't have to worry too much about down time as the machine will not be making any money for us. I expect to put about 50 hours a year on the machine.

Howdy folks, new member here. The last few days have been very hectic and very nerve racking buying our first skid steer. We settled on a Deere at first, but right before delivery the dealership called and said that 2 of the options we wanted were not on the machine. They continued to try and...