Recent content by bugleboy62

Success! PB Blaster applied liberally over two days and an 8' cheater bar did the trick!

My thoughts exactly. I'll definitely try all that before I start banging away at the stuck pin.

Note the gap where the bucket is not fully seated

I've been soaking in PB Blaster to see if I can get it loose. I think the stuck pin is bound because the opposite side is not fully seated under the bucket angle bracket, whereas the stuck pin side is fully seated.

I screwed up trying to release my bucket and now one pin is stuck and the other pin is free but the bucket is not fully seated in the angled slot. Is there a way to un-torque the bucket to release the pressure on the stuck pin?

Thank you.....will do asap.

Thanks for the info! I'm new to hydraulics, but learning every day.

Thanks for the feedback! I don't use it that much, and I haven't had it for long, but I'll keep an eye on it and add it to my list lol!

I know it needs to be replaced, just curious why it doesn't leak? video

Add an online 12v fuel pump for $25 from Amazon. Works like a charm.

Got my first skid loader! A 2001 763 C with probably close to 4k hours. I'm excited to get this puppy up to speed!