Recent content by BRENSH

I will try flipping the switch the other way. I believe it is in the run position. At times during this process, I have flipped the switch forward and the machine has stopped running. At the moment, the lights do not come on unless the key is turned. You may be onto soemthing with this switch...

Thanks Mike, I have checked the main harness for the seat, it seems properly connected.

One other note on my 665 skid steer pedal locked. I can start and operate this machine without sitting in the seat or fastening the seatbelt. There must be an electrical situation.

Mike, I changed one broken seat sensor and still same problem. The instrument panel lights up normally. The seat belt and e- brake are still blinking and the right pedal is stilll locked out. Seems likme the seat is not speaking to the instument panel.

Still trying to fix a stuck right pedal on my New Holland 665LX. I replaced the lockout solenoid and even the new one locks the pedal. The pedal was free when I removed the old solenoid. I suspect this is an electrical issue. The seat light and emergency brake lights both flash as the machine is...

I currently have the seat out to check the seat sensor. I suppose the seat should be reinatalled to check the solenoid. One other question, the seat belt and e-brake lights are flashing when running. Is this normal? Another problem today, err2 is which seems to be the fuel solenoid issue. The...

I should have specified 1997 New Holland 665 turbo. It is only the right pedal locked in place. when I attempt to rock the pedal it seems to jiggle the linkage in the right operator handle. Would the seat interlock issue only disable one pedal?

Can anyone tell me what would lock the right pedal on my 665 in place? I can lift the boom and move my plow attachment but have no tilt options as the pedal is locked up. Could this be an electrical issue?