Recent content by Blacksheep

When i built mine since all i had were the forks to start with, I used 1/2 x4- 1/2" plate to make the carrier for the forks, this width allowed my to grind in the notch's at the top for the fork pins to drop into. I backed the 1/2"2" hex shaft for stiffness and it allowed room for the fork...

Bobcat 624 propane

ITS not volatage its available amperage with the booster added to the system....same as with an EI system in a car if the battery is pulling down to 10 and it takes 12 for it to run its not gonna happen.....I still think your issue is grounds, especially at the battery, since i assume you...

It has been mentioned but too often Grounds are the issue in a no start...(key, cables, solenoid, relay, etc) but the main ground cable AND the STARTER need good clean contact grounds to function properly....even though the starter was changed, (should have done a bench test before) if you...

My attachment is the simplest of all and works so well! Go to a tire store that repairs tractor tires and get the biggest rear tire you can find they are usuallly free! (this last time i found an 18x48". Take the blade of a saber or sawsall saw and sharpen it till its like a knife. Drill a...